Product Display 

 Product Introduction 

The dust collector is mainly composed of ash hopper, filter chamber, clean air chamber, bracket, lift valve, spray ash cleaning device and other parts. When working, dusty gas enters the ash bucket through the air duct. Large particles of dust fall directly into the bottom of the ash hopper, and the smaller dust enters the filter chamber with the airflow turning upwards and is blocked on the outer surface of the filter bag. The purified flue gas enters the bag and passes through the bag mouth and the clean air chamber. When it enters the air outlet, it falls down and is discharged from the air outlet.

As the filtration continues, the dust on the outer surface of the filter bag continues to increase, and the equipment resistance rises accordingly. When the equipment resistance rises to a certain value, the dust removal operation should be carried out to remove the dust on the surface of the filter bag.

 Performance characteristics 

1. Using low-pressure pulse injection technology, high dust cleaning efficiency and low energy consumption.

Use straight-through low-pressure pulse valve. The injection pressure is only 0.2～0.4MPa, low resistance, fast opening and closing, and strong dust removal ability. Due to the good cleaning effect and long cleaning cycle, the energy consumption of back blow gas is reduced.

2. The pulse valve has a long service life and good reliability.

Due to the low blowing pressure (0.2～0.4MPa), the pressure of the pulse valve diaphragm and the impact force during opening and closing are low. At the same time, due to the longer cleaning cycle, the number of pulse valve openings is correspondingly reduced, thus prolonging the use of the pulse valve