Spindle type主軸型式 | 120 (ISO-30) | 120 (HSK-E40) | EB(M)S-120g | EB(M)S-120m | ED(C)S-120g | ED(C)S-120m | Model
外型 | Housing diameter 套筒外徑 | mm | 120 | 120 | Total length 主軸總長 | mm | 423.5/460.5 | 423.5/460.5 | Approx. weight 重量 | kg | 26 | 26 | Flange mounting 法蘭安裝 | | Yes | Yes | Operation position 操作位置 | | V/H | V/H | Lubrication
潤滑 | Grease 油脂 | | Yes | - | Yes | - | Oil/air lubrication 油氣 | | - | Yes | - | Yes | Oil injection lubrication 噴射潤滑 | | - | - | - | - | Spindle model **轉速 | 1/min | 30,000 | 36,000 | 30,000 | 36,000 | Motor
馬達 | Number of Pole 馬達極數 | pole | 4 | 4 | Voltage 電壓 | V | 220/380 | 220/380 | Max currend **電流 (220V/380V) | A | 36/21 | 36/21 | 36/21 | 36/21 | Max frequency **頻率 | Hz | 1,000 | 1,200 | 1,000 | 1,200 | Rotation direction 旋轉方向 | | CW/CCW | CW/CCW | Duty
功率 | Power S1 **** /S6 60% (P) 馬達功率 | kw | 7.5/7.5 | 7.5/7.5 | Torque S1 **** /S6 60% (T) 轉矩 | N.m | 6.1/6.1 | 6.1/6.1 | at speed (n0) 基底轉速 | 1/min | 12,000 | 12,000 | Clamping
system
夾持規格 | Front bearings size 前軸承規格 | mm | ψ45 | ψ45 | Taper size 刀把規格 | | ISO-30 | HSK-E40 | Drive dogs 驅動鍵 | | - | - | Tool dimensions 刀具**尺寸 | mm | ψ2.0~ψ20 | ψ2.0~ψ20 | Static clamping force (static) 靜態拉力 | N | 2,300~2,600 | 6,800 | Tool release pressure 主軸鬆刀壓力 | Bar | Air> 6 / Oil 60-80 | Air> 6 / Oil 60-80 | Equipment
設備 | Taper blow out ( cleaning) 換刀吹氣 | Bar | 5 | 5 | Shaft positioning(vector control) 編碼器 | | op | op | Front seal 氣幕 | Bar | 1~1.5 | 1~1.5 | Cooling system 冷卻系統 | kw | 2 | 2 | Tool detection 刀具位置 | | S | S | External coolant 環噴 | | S | S |
|
|
|
|
|
