南澳电气 NABLC氧化锌避雷器测试仪 可测全电流、阻性电流及其谐波高精度测量
面议
湖北-武汉市
有效期长期有效
产品详情推荐
产品属性
型号
NABLC-III
品牌
南澳电气
用途
用于各种电压等级的氧化锌避雷器的带电或停电检测
主要特点
高精度采样、处理电路,先进的付里叶谐波分析技术,确保数据更加可靠
主要参数
参考电压输入范围:有效值25V—250V,总谐波含量<30%,50Hz/60Hz
尺寸
325mm×280mm×140mm
所有参数

产品简介

NABLC-III氧化锌避雷器测试仪是用于检测氧化锌避雷器电气性能的专用仪器,该仪器适用于各种电压等级的氧化锌避雷器的带电或停电检测,从而及时发现设备内部绝缘受潮及阀片老化等危险缺陷。

NABLC-III氧化锌避雷器测试仪操作简单、使用方便,测量全过程由单片机控制,可测量氧化锌避雷器的全电流、阻性电流及其谐波、工频参考电压及其谐波、有功功率和相位差,大屏幕可显示电压和电流的真实波形。仪器运用数字波形分析技术,采用谐波分析和数字滤波等软件抗干扰方法使测量结果准确、稳定,可准确分析出基波和3~7次谐波的含量,并能克服相间干扰影响,正确测量边相避雷器的阻性电流。本机配有高速面板式打印机,可充电电池,试验人员在现场使用十分方便。仪器采用独特的高速磁隔离数字传感器直接***输入的电压、电流信号,保证了数据的可靠性和安全性。

产品别名

氧化锌避雷器测试仪、氧化锌避雷器特性测试仪、氧化锌测试仪、避雷器阻性泄漏电流检测仪、氧化锌避雷器带电测试仪

产品特性 

1)NABLC-III氧化锌避雷器测试仪采用大屏幕液晶显示,中英文菜单操作,使用简便。

2)高精度采样、处理电路,**的付里叶谐波分析技术,确保数据更加可靠。

3)仪器采用独特的高速磁隔离数字传感器直接***输入的电压、电流信号,保证了数据的可靠性和安全性。

4) 支持无线同步电压取样方式。 

5)具有阻性电流基波峰值输出、边相校正等功能。

6)仪器配有可充电电池、日历时钟、微型打印机,可存储120组测量数据。

产品参数

全电流测量范围

有效值 0—10mA,50Hz/60Hz

准确度:±(读数×5%±5μA)

阻性电流基波测量准确
度(二次法不含相间干扰)

±(读数×5%±5μA)

电流谐波准确度

±(读数×10%±10μA)

参考电压输入范围

有效值 25V—250V,总谐波含量<30%,50Hz/60Hz

参考电压测量准确度

±(读数×5%±0.5V)

电压谐波测量准确度 

±(读数×10%)

基波电流电压夹角Φ

0-360°

电池工作时间

主机6小时

充电电源

220V±10%  50Hz/60Hz

充电时间

5小时

主机体积

325mm×280mm×140mm

主机重量

3.5Kg(不含线缆)

工作环境

温 度

-10℃—50℃

湿 度

<90%


Product introduction

NABLC-III zinc oxide arrester detector is a special instrument for detecting electrical properties of zinc oxide surge arresters.Theinstrument issuitable for charging or power outage detection of various voltage levels of zinc oxide surge arresters, timely detection of equipment internal insulation damp and valve aging andotherdangerousdefects.

NABLC-III zinc oxide arrester detector is simple and easy to operate, the entire measuring process is controlled by microcontrollerstomeasure thefull current, resistive current and its harmonics, frequency reference voltage and its harmonics, active power and phase difference of zinc oxide surge arrester, a large screen candisplaythe realwaveform of voltage and current.

The instrument is adopt with digital waveform analysis techniques, used harmonic analysis and digital filtering software suchasanti-jamming method tomake the test result accurate and stable, it not only can accurately analysis the fundamental and the content of 3 to 7 times of harmonic, but also can overcome theinfluenceof the interphaseinterference to rightly measuring the resistive current of edge phase arrester.

The instrument is equipped with high-speed printer panel, rechargeable battery, it is very convenient to test in the field. It usesaunique high-speedmagnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.

Also called name

Zinc oxide arrester tester, intelligent arrester tester, anti-interference characteristics of zinc oxide arrester tester,leakagecurrent arresterresistive detector, zinc oxide arrester tester charged, zinc oxide surge arresters without gaps for ac tester, zinc oxide arrester tester

The Characteristics of the products

1.A large-screen LCD display, easy to operate.

2.Adopting high-precision sampling, processing circuitry, advanced Fourier harmonic analysis techniques to ensure the data ismorereliable.

3.Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensurethedata reliabilityand security.

4.Support wireless synchronization voltage sampling way.

5.With the function of fundamental peak output of resistive current, edge phase correction and so on.

6.The instrument is equipped with a rechargeable battery, calendar clock, mini printer, it can store 120 sets of measurement data;

The parameters of the products 

(1) Measurement range of full current: 0-10mA RMS, 50Hz/ 60Hz; Accuracy: ±(reading x 5% +5μA)

(2) Measurement accuracy of fundamental resistive current  (secondary law without interphase interference):±(reading  x  5% +5μA)

(3) Accuracy of current harmonics: ±(reading x 10% +10 μA)

(4) Input range of reference voltage: 25V ~ 250V RMS, total harmonic content < 30%, 50Hz/ 60Hz

(5) Measurement accuracy of reference voltage: ±(reading×5% +0.5 V)

(6) Measurement accuracy of voltage harmonics: ±(reading×10%)

(7) The angle of fundamental current and voltage Φ: 0 ~ 360°

(8) Battery working time: Host 6 hours

  Charging power: 220V ±10% 50Hz/ 60Hz Charging time: 5 hours

(9) Dimensions: 325mm x 280mm x 140mm

(10) Weight: 3.5Kg (do not include cable)

(11) Operating environment: Temperature: -10-50 ℃Relative humidity: < 90%


Product information

1, Taken from the PT secondary voltage reference, you should carefully check the wiring to avoid PT secondary circuit.

2, The voltage signal input line and the current signal input line must not be reversed, if the current signal input line connectedtoPT3, testtransformer secondary side or measuring end, it may burn the instrument.

3, Where the input voltage and input current circumstances, do not plug the measuring line, so as not to burn the instrument.

4, The instrument is damaged, stop using it immediately and notify the Company and do not repair yourself out of the box. Whentheinstrument is notworking properly, first check the power fuse is blown. After replacement of the same model can continue the insurance experiment. If the problem is more complex, please contactmedirectly.

5, The instrument must not be placed in humid and high temperature environments.

6, The instrument is not used as a long time (more than three months), the battery will run out of damage, so each interval of 3 months should be given to the instrumentonecharge(6 hours or more), in order to ensure that the instrument can be used normally. Charging steps: Turn the power switch, plug in 220V power until the battery is indicating below the LCDscreen90% ormore.

免责声明:当前页为 南澳电气 NABLC氧化锌避雷器测试仪 可测全电流、阻性电流及其谐波高精度测量产品信息展示页,该页所展示的 南澳电气 NABLC氧化锌避雷器测试仪 可测全电流、阻性电流及其谐波高精度测量产品信息及价格等相关信息均有企业自行发布与提供, 南澳电气 NABLC氧化锌避雷器测试仪 可测全电流、阻性电流及其谐波高精度测量产品真实性、准确性、合法性由店铺所有企业完全负责。世界工厂网对此不承担任何保证责任,亦不涉及用户间因交易而产生的法律关系及法律纠纷,纠纷由会员自行协商解决。

友情提醒:世界工厂网仅作为用户寻找交易对象,就货物和服务的交易进行协商,以及获取各类与贸易相关的服务信息的渠道。为避免产生购买风险,建议您在购买相关产品前务必确认供应商资质及产品质量。过低的价格、夸张的描述、私人银行账户等都有可能是虚假信息,请您谨慎对待,谨防欺诈,对于任何付款行为请您慎重抉择。

投诉方式:fawu@gongchang.com是处理侵权投诉的专用邮箱,在您的合法权益受到侵害时,请将您真实身份信息及受到侵权的初步证据发送到该邮箱,我们会在5个工作日内给您答复,感谢您对世界工厂网的关注与支持!

南澳电气(武汉)有限公司
进入店铺
2004成立时间
500万注册资本
51-100人公司规模
联系方式 企业档案

电话027-87677658

传真027-87677658

手机15327206266

QQ2133802090

地址东湖高新技术开发区关山大道

工商信息
统一社会信用代码91420100MA4KLYTB4P
成立日期2016年02月24日
组织机构代码MA4KLYTB4
经营状态存续
法定代表人余世家
店铺推荐
全部产品
更新时间:2024-11-26
首页 分类 世界工厂 我的 客服
产品属性
型号
NABLC-III
品牌
南澳电气
用途
用于各种电压等级的氧化锌避雷器的带电或停电检测
主要特点
高精度采样、处理电路,先进的付里叶谐波分析技术,确保数据更加可靠
主要参数
参考电压输入范围:有效值25V—250V,总谐波含量<30%,50Hz/60Hz
尺寸
325mm×280mm×140mm
重量
5kg
品牌
南澳电气
关闭
功能直达
首页
产品二维码
搜索
消息
全站同款
意见反馈
用小程序访问该企业,关注及对接
点击保存二维码,微信扫一扫识别
全部分类
工业品
原材料
消费品
智能制造
人工智能
双碳
新能源汽车
农业畜牧
宠物园艺
商务服务