BJ--8612進氣系統清洗劑 

本品是由聚異丁烯胺、聚醚胺等有機胺作為清洗滲透劑、分散劑，對進氣系統形成的膠質和“油泥”進行溶解，全面提高性能。產品不含苯、硫化物等有毒易燃品和金屬元素，閃點、燃點較高，操作簡單。

產品性能：

1，   徹底清除節氣門、喉管、進氣管壁等處的膠質和積碳。

2，   改善進氣性能，恢復正常空燃比，降低尾氣排放，使發動機怠速更平穩，降低油耗。

3，   對氧感測器和催化轉換器無害。

4，   清洗劑中含有防腐劑和潤滑劑，對機件具有防銹、防腐耐磨損的保護作用。

使用方法：

1，   系統檢查，確保沒有機械和電路故障，否則要修復後再進行清洗保養。

2，   發動機熄火，引擎蓋打開並架穩。

3，   根據車輛發動機排量大小加入一定量的清洗劑致燃油系統免拆清洗設備中。

4，   將免拆清洗設備連接好。

5，   免拆設備進氣壓力調整在 2~4Kg/c㎡。

6，   啟動車輛，在車輛怠速下進行清洗。

注意事項

不可食用;易燃應放陰涼處保存

Intake and exhaust system maintenance products

BJ--6216 intake system cleaner

This product is made from polyisobutene amine, polyether amine organic amine as a cleaning agent, dispersing agent, the air intake system formation of the glial and " sludge " were dissolved, and comprehensively improve performance. Products do not contain benzene, sulfide and other toxic flammable materials and metal elements, flash point, higher ignition, simple operation.

Product performance:

Complete removal of solar term door, venturi tube, the wall of the intake pipe and the gum and carbon deposition.

Improved intake performance, return to normal air-fuel ratio, reduce exhaust emissions, let the engine run more smoothly, reducing fuel consumption.

The oxygen sensor and catalytic converter harmless.

Cleaning agent containing preservatives and lubricant, antirust, corrosion of parts with wear protection.

Method of use:

System check, ensure that no mechanical and circuit fault, or to repair after cleaning and maintenance.

The flameout of the engine, engine cover open and shelf stability.

According to the vehicle engine displacement size by adding a certain amount of cleaning agent to the fuel system cleaning equipment.

The cleaning device connected.

Dismounting device inlet pressure adjustment in the 2~4Kg/c ㎡.

Start the vehicle, the vehicle idling for washing.

Matters needing attention

Inedible; flammable should be put in the shade save