BJ--8051發動機內部清洗劑 

本品採用進口全新納米配方，由高效的清潔劑和分散添加劑精製而成。它能將所有類型的可溶解油和不可溶解油的殘渣變成懸浮液，並在換油時隨舊機油移走。

產品性能：

1，     發動機內部清洗，使潤滑系統正常工作，避免潤滑不良引起的磨損和發動機故障。

2，     消除因各積碳、污垢使活塞環失去彈性而致的燒機油、冒藍煙現象。

3，     解決因機油孔道阻塞而導致的配氣機構工作噪音大的問題。

4，     減少雜質對新機油的污染，延長新機油的使用壽命。

5，     適用於各種汽油和柴油車輛潤滑系統的清洗，各種工業設備、礦山機械和工程機械潤滑系統的清洗。

使用方法：

在換油前加到正在運轉的發動機油中，一次一支。加完產品後，根據污染程度讓發動機怠速大約10-15分鐘，使其與機油充分混合，徹底溶解附著在發動機內壁及篩檢程式上的污垢，能與所有商業發動機用油相容.

發動

本品採用進口全新納米技術製成的高效發動機保護劑，在發動機潤滑系統內部，其納米級成分會緊緊地附著於金屬表面，在摩擦表面形成有效的保護膜。以減少發動機磨損，延長發動機壽命，提高發動機動力；同時還可以防止高溫下機油的氧化稠化，強化機油品質；抑制油泥，清漆的產生，保持發動機清潔，活化油封；減少尾氣排放。

產品性能：

1，   節省燃油，降低油耗，防止橡膠密封件老化。

2，   抑制潤滑系統積碳、油泥的生成，保持機件表面和孔道清潔。

3，   保持氣缸內部和機件之間的配合間隙，保持良好的動力性能和啟動性能。

4，   減低運行嗓音。

5，   防止機油氧化，中和酸性物質，防止機件腐蝕，延長機件和發動機壽命。

使用方法：

將本品直接由機油加注口加入即可。小車每次加一瓶，或按潤滑油重量的8%加入，隨新機油加入效果會更佳。適用於汽車發動機和工業設備等需潤滑的金屬表面使用。

注意事項

不可食用;易燃應放陰涼處保存

BJ--6004 internal engine cleaning agent

This product adopts import new nanoparticle formulations, the efficient detergent and dispersant additives and refined. It can all types of soluble oil and soluble oil residue into suspension, and in the oil with used engine oil removal.

Product performance:

The engine internal cleansing, lubricating the normal work of the system, to avoid the bad lubrication caused by wear and engine fault.

Due to the elimination of the carbon deposition, the dirt to make piston ring elasticity loss caused by burning oil, blue smoke phenomenon.

Oil duct obstruction caused by the gas distribution mechanism of the working noise is big problem.

Reduction of impurities on new oil pollution, prolonging service life of new oil.

Applicable to all kinds of gasoline and diesel vehicle lubrication system cleaning, all kinds of industrial equipment, mining machinery and construction machinery lubrication system cleaning.

Method of use:

In the oil prior to running engine oil, a once. Plus the finished product, according to the degree of pollution let the engine idle speed for 10-15 minutes, and the oil well mixed, completely dissolved attached to the engine and the dirt on the inner wall of screening programs, with all commercial engine oil compatible.

Launch

This product adopts import new nanotechnology high efficiency engine protective agent, in the engine lubrication system, the nanometer component can be tightly attached to the metal surface, the protective film formed on the friction surface of effective. In order to reduce engine wear, extend engine life, improve the engine power; but also can prevent the high temperature oil oxidation thickening, strengthen the quality of engine oil; inhibit sludge, varnish, keep the engine clean, reduce exhaust emissions activation oil seal.

Product performance:

Save fuel, reduce fuel consumption, prevent aging of rubber seals.

Inhibition of carbon deposition of lubrication system, the formation of sludge, keep the machine clean surface and pore.

To maintain the interior of the cylinder and the fit clearance between the parts, to maintain a good dynamic performance and the starting performance.

Reducing running voice.

Prevent oil oxidation, neutralization of acid, corrosion, long service and the service life of the engine.

Method of use:

The goods will be added directly from the oil filler. The car with a bottle every time, or by the lubricating oil weight 8% to join, with the new oil to join the effect will be much better. It is suitable for automobile engines and industrial equipment to be lubricated metal surface using.

Matters needing attention

Inedible; flammable should be put in the shade save