BJ--2018  耐高溫防咬死潤滑劑

本品是由無機稠化劑稠化耐高溫合成油添加超微粒純銅粉末以及防銹、防腐蝕等添加劑精製而成的高溫防卡死潤滑劑。此耐高溫潤滑劑適用於汽車刹車系統，特別是ABS刹車系統，能有效消除刹車噪音，預防刹車片受熱咬死，有效保護刹車片，延長使用壽命。適用溫度範圍：-40～+1000℃。

產品性能 ：

1，極佳的高溫防粘、防燒結性和螺紋密封性，高溫不熔化。

2，優異的抗高壓能力，摩擦係數與塗油螺栓相同，耐水淋性好。

3，優良的防銹、耐腐蝕性，經反復拆卸、擰緊仍具有穩定的扭矩。

4，在長期高溫或酸堿的惡劣條件下，能有效防止部件卡死、腐蝕及表面擦傷。

推薦應用：

1，用於汽車刹車片背面及滑槽內可保證刹車片和碲鐵不會因高溫而開裂，還可消除雜音並能增強刹車系統精確度和靈敏度，也可用於刹車盤螺絲的防咬死。

2，汽車發動機排氣支管螺栓、排氣系統螺栓、消音器夾與尾管組件，刹車卡鉗插銷、套筒或制動蹄片支承盤，       氧感測器、撞擊感測器、調溫器外殼螺栓，注塑機射嘴，煤氣和油燃燒設備的螺栓。 

使用方法：

戴好單指手套，均勻塗抹在每個輪胎螺絲杆和胎齡與輪轂之間的金屬接觸面上。

注意事項

    不可食用;易燃應放陰涼處保存

BJ--2018 high temperature anti seize lubricant

This product is made from inorganic thickener thickener high-temperature synthesis oil adding ultra fine copper powder and rust-proof, anti-corrosion additive refined from the high temperature anti-card die lubricant. The high temperature lubricant applied to the brake system of the automobile, especially the ABS brake system, can effectively eliminate the noise prevention brake, brake is killed, the effective protection of brake pads, prolong the using life of. Applicable temperature range: -40 ~ +1000 ℃.

Product performance:

Excellent high temperature resistant antisticking, sintering and sealing property, high temperature melting.

Excellent resistance to high pressure, friction coefficient and greased bolt, water pouring.

Excellent rust, corrosion resistance, after repeated disassembly, tightening torque is stable.

In the long term high temperature or pH under harsh conditions, can effectively prevent the member card dead, corrosion and surface abrasion.

Recommended application:

For automotive brake back and sliding groove can ensure the brakes and tellurium iron because of the high temperature will not crack, can eliminate the noise and can improve the accuracy and sensitivity of brake system, can also be used for brake disc screw anti-seizing.

Automotive engine exhaust manifold, exhaust system muffler bolt bolt, clamping and tail pipe assembly, brake caliper bolt, socket or brake anchor plate, oxygen sensor, impact sensor, thermostat housing bolt, injection molding machine nozzle, gas and oil burning device of bolt.

Method of use:

Wearing a single glove, evenly on each tyre screw rod and the gestational age and the hub between the metal contact surface.

Matters needing attention

Inedible; flammable should be put in the shade save