l Low-noise operation

l High-efficiency drive

l Accurate transmission

l Anti-cold, Anti-heat, Anti-oil performance

l Abrasion resistance, good tensile strength

l Maintenance-free, high life expectancy

Construction of this timingbelt:

l Top surface: PVC wear-resistant rubber

l Tension line: a very low elongation of the glass fiber tension line

l Base layer: PVC rubber

 l Fabric: abrasion-resistant polyamide

(1) Layer of glass fiber tensile

     Tensile layer is made of glass fiberstrands of glass fibers of the rope, along the tape width of thespiral to the section of the tape around the cloth line position,its high strength, small elongation, corrosion resistance and heatresistance excellent knowledge erosion.

(2) Neoprene belt back

   Neoprene back with it firmly bonded glass fiberalignment in the section plays a protective role of tensilematerials, the need to use the drive with the back of the occasion,to prevent damage caused by the friction, it is more thanpolyurethane timing belt back more excellent hydrolysis resistanceand heat resistance.

(3) Neoprene toothed

   With teeth by the shear strength, hardness neopreneappropriate composition, require sophisticated and precisedistribution of the molding position to the alveolar properlyengaged with the pulley, the tooth root with the provisions ofsection line is the distance from the bending season No change.

(4) Layer of nylon pack cloth

   Layer of nylon pack cloth tape to protect againstfriction, should be a superior wear resistance, frictioncoefficient is composed of nylon cloth.

(1) Drive accurate work without sliding, with a constanttransmission ratio;

(2) Smooth transmission, with a cushion, damping capacity, lownoise;

(3) High transmission efficiency, up to 0.98, energy savingeffect is obvious;

(4 ) Easy maintenance, no lubrication, low maintenancecosts;

(5) Ratio range, generally up to 10, the line speed of up to 50m/ s, with a large range of power

transmission, up to a few watts to hundreds of kilowatts ;

(6) Can be used for long distance tr ansmission, up to 10m abovethe pitch